ship shafts - bow thrusters - Schottel drives - POD drives- accessories for sailing yachts
The heart of our bow thrusters with 2-piece brass tubes is the gear unit, which is manufactured exclusively as an all-metal design. Brass tubes are pushed onto the massive gear unit on both sides. These are glued to the brass tube of the gear unit by the ship model builder. The advantage of this split design is the ease with which the brass tubes can be machined, as they can be easily adapted to the geometry of the fuselage. The two attachable brass tubes allow easy installation in the ship's hull, as the holes in the hull do not have to be unnecessarily large. Since the inner wall has almost no offset, the flow resistance is very low.
The following features speak for themselves:
- gear housing made of brass, glass bead blasted.
- bevel gears made of milled steel.
- drive shaft made of stainless steel, 2 sintered bronze bearings.
- output shaft made of stainless steel, sintered bronze bearings or 1 ball bearings.
- 2 pcs high efficiency cast brass propeller.
- lifetime lubrication of the gear unit.
Our bow thrusters are a sturdy construction, which clearly stands out from the products offered on the market in terms of durability and functional guarantee. A bow thruster once built into the hull of a valuable ship model must not fail! Therefore, when buying, make sure you are looking for a high-quality product that you will enjoy for the entire lifespan of your ship model.
JEDAMSKI BOW THRUSTERS will not let you down!
Product no.: 150109
bow thruster with attachable brass tubes number of propellers: 2 tube inside diameter: 20 mm tube outside diameter: 22 mm tube length overall: 140 mm minimal installation width: approx. 54 mm article no. 150109
|
89.25 €
*
In stock |
|
Product no.: 150109-S
bow thruster with attachable brass tubes Version with very small installation width approx. 38 mm number of propellers: 2 tube inside diameter: 20 mm tube outside diameter: 22 mm tube length overall: 140 mm minimal installation width: approx. 38 mm article no. 150109-S
|
102.30 €
*
In stock |
|
Product no.: 150110
bow thruster with attachable brass tubes number of propellers: 2 tube inside diameter: 24 mm tube outside diameter: 26 mm tube length overall: 140 mm minimal installation width: approx. 53,4 mm article no. 150110 |
116.60 €
*
In stock |
|
Product no.: 150110-S
bow thruster with attachable brass tubes Version with very small installation width approx. 38 mm number of propellers: 2 tube inside diameter: 24 mm tube outside diameter: 26 mm tube length overall: 140 mm minimal installation width: approx. 38 mm article no. 150110-S
|
128.50 €
*
In stock |
|
Product no.: 150111
bow thruster with attachable brass tubes number of propellers: 2 tube inside diameter: 28 mm tube outside diameter: 30 mm tube length overall: 170 mm minimal installation width: approx. 59 mm article no. 150111 |
119.00 €
*
In stock |
|
Product no.: 150111-S
bow thruster with attachable brass tubes Version with very small installation width approx. 43 mm number of propellers: 2 tube inside diameter: 28 mm tube outside diameter: 30 mm tube length overall: 170 mm minimal installation width: approx. 43 mm article no. 150111-S |
130.90 €
*
In stock |
|
Product no.: 150222
bow thruster with attachable brass tubes number of propellers: 2 tube inside diameter: 32 mm tube outside diameter: 34 mm tube length overall: 200 mm minimal installation width: approx. 61 mm article no. 150222 |
120.20 €
*
In stock |
|
Product no.: 150222-S
bow thruster with attachable brass tubes Version with very small installation width approx. 45 mm number of propellers: 2 tube inside diameter: 32 mm tube outside diameter: 34 mm tube length overall: 200 mm minimal installation width: approx. 45 mm article no. 150222-S |
132.10 €
*
In stock |
|
Product no.: 150333
bow thruster with attachable brass tubes number of propellers: 2 tube inside diameter: 38 mm tube outside diameter: 40 mm tube length overall: 200 mm minimal installation width: approx. 66 mm article no. 150333 |
125.00 €
*
In stock |
|
Product no.: 150333-S
bow thruster with attachable brass tubes Version with very small installation width approx. 50 mm number of propellers: 2 tube inside diameter: 38 mm tube outside diameter: 40 mm tube length overall: 200 mm minimal installation width: approx. 50 mm article no. 150333-S |
125.00 €
*
In stock |
|
Product no.: 150444
bow thruster with attachable brass tubes number of propellers: 2 tube inside diameter: 43 mm tube outside diameter: 45 mm tube length overall: 250 mm minimal installation width: approx. 66 mm article no. 150444 |
144.00 €
*
In stock |
|
Product no.: 150444-S
bow thruster with attachable brass tubes Version with very small installation width approx. 50 mm number of propellers: 2 tube inside diameter: 43 mm tube outside diameter: 45 mm tube length overall: 250 mm minimal installation width: approx. 50 mm article no. 150444-S |
159.50 €
*
In stock |
|
Product no.: 150555
bow thruster with attachable brass tubes number of propellers: 2 tube inside diameter: 48 mm tube outside diameter: 50 mm tube length overall: 300 mm minimal installation width: approx. 72 mm article no. 150555 |
148.80 €
*
In stock |
|
Product no.: 150555-S
bow thruster with attachable brass tubes Version with very small installation width approx. 52 mm number of propellers: 2 tube inside diameter: 48 mm tube outside diameter: 50 mm tube length overall: 300 mm minimal installation width: approx. 52 mm article no. 150555-S |
159.50 €
*
In stock |
|